高精度伺服系统基于Fuzzy决策的专家变模态控制

本文简要回顾了具有双积分模型的电流驱动直流机电伺服系统的传统设计方法，设计了基于Ｆｕｚｚｙ决策的专家变模态控制器。该控制器积累了伺服系统设计的一些经验，具有一定的“社会智能”，可以在系统运行的不同阶段自发地选用合适的控制律，组合简单的控制方法实现高品质控制。体现了将控制任务分解成子任务分阶段完成的思想。实例仿真及实验结果说明了该方法的有效性     

细长旋成体大迎角绕流的背涡结构与压力脉动特性

在亚临界流动范围内,通过尖拱细长旋成体在无侧滑状态下的脉动压力测量,对大迎角下细长旋成体非对称背涡结构沿轴向的压力脉动特征进行了研究分析,揭示了压力的脉动幅度与频率沿旋成体轴向的变化规律及其与背涡结构之间的对应关系,并对压力脉动特征沿轴变化的原因进行了初步探讨.     

Experimental study of damping properties of a composite torsion bar in the helicopter main rotor hingeless hub

The results of the experimental studies of damping characteristics of a composite torsion bar in the helicopter main rotor hingeless hub are presented. A variant of their improvement is considered.     

The finite element analysis of shells of revolution with a branching meridian

We present an algorithm for calculating the shells of revolution with the branching meridian using the triangular finite elements, the rigidity matrices of which are formed based on the vector method of displacement interpolation [1]. The correct kinematic and static conditions of shell conjugation on the line of their coupling have been developed. The shell structure consisting of a cylinder and adjacent shells is calculated under various conditions of support.     

基于ADAMS/Aircraft的起落架滑跑模型仿真

以小车式起落架为例,利用ADAMS/Airc- raft建立了起落架滑跑试验仿真模型.给出了起落架滑跑运动方程,并进行了滑跑试验仿真分析。仿真结果与理论要求对比具有较好的一致性。     

新型精密狭缝的设计

介绍了一种基于弹性铰链的精密狭缝的设计，加工工艺要求和性能测试结果。根据实际需要，狭缝可以采用水冷结构。     

Stability of resonance rotation of a satellite with respect to its center of mass in the orbit plane

The stability of resonance oscillations and rotations of a satellite in the plane of its orbit in the case when the difference of the moments of inertia with respect to the principal axes lying in the orbit plane is small is determined at a given rotation number m by the sign of function Φ_m(e), introduced by F.L. Chernous’ko in 1963. In this paper, convenient analytical representations of functions Φ_m(e) are described in the form of integrals and series of Bessel functions regular at e → 1^?. Values of Φ_m(1) are calculated in explicit form. A theorem about the double asymptotic form of functions Φ_m(e) at m → ∞ and e → 1^? is proved by the saddlepoint method.     

质量管理体系建设必须与企业发展战略相适应

提出了质量管理体系建设中存在的问题和解决途径,对不同企业发展战略的质量管理体系进行了比较,指出了质量管理体系建设必须与企业发展战略相适应。     

精密机械零件的统计尺寸公差

精密机械产品的发展要求具有高性能、高可靠性和高质量。如果用设计时减小公关的方法来保证精度，则将难以解决加工和装配中产生的问题。因此需要在采用尽可能大的公差值的民政部下满足精度一文将讨论一些实例，寻找借助于统计尺寸公差降低加工精度要求的办法。